Manufacturer For Marble Adhesive Factory - Transparent Marble Adhesive China Manufacturer – HERCULES

Specification

Product Display

Main Characteristics

1. Cure in short time.

2. Strong hardness and stable storage.

3. Can be operated in cold weather.

4. Hard enough for polishing.

Usage Condition

● The best application temperature of this product should be 10℃ above or below the local average temperature.

● The lowest application temperature of this product should be above 5℃. It needs to take necessary thermal insulation measures if below temperature 5℃.

● The storage temperature should be less 35℃. If the room temperature is higher than 35℃, cooling measures shall be taken to ensure the warranty period of this product.

How to Use Marble Adhesive

1. Keep the surface to be treated dry, clean and slightly rough.
2. Add 100 parts of the adhesive with 1-3 parts hardener, mixing the two ingredients thoroughly and apply in the surface with the tool.

Caution

◆ Do not return the mixed glue to the original can;

◆ Add more or less hardener to the adhesive to make the curing time shorter or longer;

◆ Stored in dry and shady place and keep the lid tightly closed after using;

◆ 12 months of shelf life (keep away from heat, humidity and sun light);

◆ Do not make the bonded parts exposed in wet and frosty place;

◆ Clean the tools immediately with special solvent after using;

◆ Refer to the application direction on the package before using.

◆ If to bond the hanging parts, please use our epoxy AB Adhesive;